Common Touchless Faucet Problem [How To Fix Them]

Popular touchless faucets have increased throughout the years. To switch the water on and off, you can use these fixtures: Touching the fixtures does the trick, not turning handles.

These characteristics are advantageous whether you’re cooking or cleaning, help to keep your kitchen/laundry sanitary, and save water.

Touchless faucets are generally considered washroom fixtures in airports and stadiums. Thanks to these touchless faucets, which assist save water and preventing the spread of bacteria, the supply of clean water will be maintained.

While touchless faucets are being increasingly used in the home, they remain unpopular with customers.

If you are planning to have children in your home, these handguards will be an excellent choice for their bathroom sinks. Touchless faucets should be considered if you are considering buying one for your home.

People commonly experience problems while using touchless faucets. You may need to know how to reset a touchless faucet. Keep reading the content to know more about common touchless faucet problems.

Common Touchless Faucet Problem

What are the common touchless faucet problems?

You may have questioned why is your touchless faucet not working. Here are a few touch faucet problems for which your faucet may stop working.

Slow Water Flow

Check if the water valve is fully open and if the faucet is making a slow flow of water. If you remove and clean the aerator, you may restore regular water flow. Additionally, the solenoid valve may have some material blocking it.

However, if you are unable to clear up the problem by replacing the solenoid valve, you will require a replacement kit.

Malfunctioning of Aerator

Our initial thought is that the touchless faucet touch doesn’t work, however, the aerator may be broken. Widespread mineral deposits from your water might accumulate on these screens, preventing the water from flowing.

Check if the touchless faucet performs properly without an aerator, and then proceed. Aerating with vinegar will do the trick if the problem persists. Otherwise, it’s time to replace the aerator.

Dead Battery

You may need to inspect how long batteries last in a touch faucet by reading a manual. For a touch faucet, the battery could have died. Many touchless faucets come with a sensor light that may flash or glow, depending on the level of battery charge.

Your user’s manual might help you to change the battery or determine what is happening from the indicator light. Keep your batteries charged and follow the user’s instructions. If you stay on top of this, your problem should be solved.

Clogged Sink

To unclog your plumbing, look under your sink and try to see if you can find the water coming out of your touchless faucet. This should be tested by removing the hot and cold supply lines from under the sink and then shutting off the hot and cold valves.

Open the valves one at a time to examine if water is flowing. You won’t be able to fix the problem without a plumber.

Leak in the Faucet

The faucet could drip when the water activation cycle has ended. If so, the faucet should be adjusted, or there could be something blocking the touchless faucet. Water will begin to leak if you turn the dial to the auto position and then activate the water.

Be careful not to get water on the plumbing valves. Also, remove the aerator from the faucet’s underside and clean the bottom of the touchless faucet. Use the filter again, but do not put the aerator back on until the water has returned to normal.

Begin activating the sensor a few times and allow the running water to rinse away any dirt residue. When the water runs cleanly, reconnect the aerator.

Related Articles: The Best Bathroom Faucet For Hard Water

How you can identify the troubleshooting in the faucet

How You Can Identify The Troubleshooting In The Faucet

Sensor Inspection

You may see that the low motion sensor touchless faucet not working. Look for the sensor eye on the faucet if it is not activating. To clean the eye, remove the protective adhesive label, and then remove any dirt that may be present.

If the sensor eye is scratched or damaged, it should be replaced. Be sure to avoid having the “permanent off” option enabled.

Before you use the touchless faucet, make sure the sensor is triggering. Use a thumbtack or other object to manually modify the sensing zone or sensor range on the faucet.

Check Power Supply

When the LED light on your device flashes repeatedly, it can be a sign of a faulty power source, the LED light is not flashing, or the faucet in your home isn’t working. Depending on the model, touchless faucets with a battery backup might work off battery power or A/C electricity.

Eco-friendly batteries include a built-in rechargeable system that works when water goes through the faucet. Not all touchless faucets have batteries.

Failures in Faucet Function

When experiencing troubles with water supply, check to see whether any special functions were mistakenly triggered, such as “continuous run,” “temporary off,” or “permanent off” features. Range the sensor to its factory default settings.

Make sure that your water supply pipes are open to the exterior. Treat the faucet’s wiring to find an underwire that has been crimped or damaged, which is the source of the problem. Diaphragm seal repair is necessary if your machine will not stop running or is dripping.

Check the Solenoid Battery

There is a chance that the battery is out of order if all the typical plumbing components are in good condition and clean. Some touchless faucets change color when the cold and hot water is running.

The light is turned off when the faucet is turned off. It signifies that the battery is low when the LED light is blinking and the water is off. To ensure proper functionality, replace the batteries even if the faucet remains at its lowest flow rate after the battery has been replaced.

More For You: Why Do Women Like Hot Showers?

How to turn off the touchless function?

Do you know how a touch faucet turns on by itself? For the sensor to recognize your hand movements and have the faucet turn off when you step away from the sink, it must first detect your hand movements.

How you can check the status of the Battery Pack?

If you first look at the light on the base of the faucet, you will find your error. When the water is actively flowing out cold, this LED light will become blue. If the water is actively coming out hot, the light will turn red.

When the water is turned off, if the red light on the battery warning system begins to flash every five seconds, the battery is critically low. Underneath the sink, six AA batteries power the faucet’s solenoid valve.

Bottom Line

Touchless faucets use automated faucet controls to make it possible to turn on the faucet hands-free. Many people have touchless faucets in their homes. This reduces unnecessary water use, since those who like to keep the faucet running sometimes neglect to turn it off when doing other water-related duties.

A more sanitary solution is water control, which automates the process of delivering water, and prevents the introduction of contaminants into the water. This instruction will enable you to locate the problem with the touch faucet and solve it quickly.

by Uzzal Robiul
Uzzal Robiul is the Founder and Editor of Bathever, a website that he started to provide readers with the right guidance, solutions, and tips on bathroom fixtures. Uzzal’s expertise includes in-depth bathroom fixtures reviews and its solutions.

Leave a Comment