How To Clean Shower Head Legionella? [4 Easy Tips]

One of the greatest threats to human health and life when it comes to water sanitation and purification is the bacteria Legionella, which can cause the deadly disease Legionnaires’. There are substantial health consequences to Legionnaires disease if it is caught.

Limescale and biofilms can build up on shower heads and hoses that stay partially wet after usage. Showerheads and hoses should be cleaned regularly as part of your Legionella control program since they emit aerosols that can be breathed by the user.

Water droplets in the air are the primary means by which Legionellosis is spread, making showers a particularly dangerous place to be if you don’t clean your showerheads properly.

By doing so, you reduce your chances of contracting Legionnaires ‘disease and help prevent the spread of the disease to others. You must keep reading this article to know how to clean shower head legionella.

How To Clean Shower Head Legionella

How Do You Measure The Risk of Legionella in The Shower Head?

The first step in determining the level of risk in your bathroom is to look at the bigger picture. Determine where your water comes from and how it is heated. The cleanliness and functionality of a water tank should be a top priority.

A legionella bacterium’s food source might be your water tank if it contains rust and corrosion, biofilm, and/or other debris.

The importance of doing thorough annual inspections and cleanings cannot be overstated. The clarifier, on the other hand, necessitates regular inspection, maintenance, and general upkeep if it heats your water.

In the meanwhile, the hazard is deemed reduced if you use a combined boiler to heat your water because the hot water is not stored but is heated on demand and when required.

A storage tank should never have its temperature drop below 50°C in order to eliminate the risk of legionella. In other places, hard water-encouraging limescale can be a food source for germs, thus showerhead descaling should be done on a regular basis.

What is The Process of Cleaning Shower Head Legionella?

Tip 1: Use Showerhead Plus Gel

Several items don’t allow for full submersion in a bucket or similar container so that the showerhead and hose can soak for an extended amount of time.

Showerhead Plus liquids and gels, which are widely used to clean showerheads and hoses, have been shown to be effective in the management of legionella and other germs.

To do so, it successfully removes both scale deposits and bacterial pollutants, as well as being acceptable for chrome fittings at the right dilution.

Tip 2: Use Chlorine Based Products

Chlorine-based disinfectants like those used to sterilize baby bottles are routinely used to clean and disinfect. Check with the manufacturer to see if the product is successful in preventing legionella, as well as the dilution rate and timing.

Tip 3: Clean Regularly

Additionally, you should clean your shower and showerhead on a regular basis.

This doesn’t just apply to the visible aspects of the body. Dismantling and cleaning your shower head using a recognized product is also required to tackle any scale, debris, or germs that may be lurking inside the shower system itself.

Tip 4: Flush with Hot Water

It’s also a good idea to flush the shower with hot water before using it. Legionella bacteria thrive in temperatures between 20 and 45 degrees Celsius but fall when the temperature reaches 60 degrees Celsius or above.

Running the shower for a few minutes before using, it is also recommended if you’ve just returned from a vacation. This will aid in the removal of microorganisms that may have accrued while you were away from the house.

Also Read: Best Toilet Seat That Won’t Stain

Frequently Asked Question

Do you use conventional household washing gel for showerhead cleaning?

This is despite the fact that many people assume that cleaning showerheads with common home chemicals are a safe and effective method of removing impurities.

To put it another way, the bulk of these standard showerhead de-clogging products just descale the showerhead’s exterior and don’t penetrate its interior. This is exactly where legionella bacteria would thrive if left unchecked. It is impossible to sterilize or completely disinfect any component of the showerhead with these products.

Should you practice this for a long time?

With that being the case, it is important to note that even well-maintained showerheads will lose their effectiveness over time due to mineral buildup.

Consider the long-term benefits of antimicrobial water treatments, which clean and disinfect tanks and showers by breaking down and blocking the growth of germs, thereby providing long-term protection against bacterial contamination.

Bottom Line

Inhalation of water droplets with the bacteria legionella can cause the potentially fatal illness Legionnaires’ disease. A shower or a spray nozzle can pose a danger. Though infection rates are quite low, it’s a good idea to keep your shower clean if you’ve recently been ill or are more susceptible to illness.

Some people are more susceptible to infection, especially those undergoing treatment in hospitals, so it’s important to keep this in mind. To prevent Legionnaires disease, I hope you’ll follow the advice in this article to know how to clean showerhead legionella and clean your showerhead properly.

by Uzzal Robiul
Uzzal Robiul is the Founder and Editor of Bathever, a website that he started to provide readers with the right guidance, solutions, and tips on bathroom fixtures. Uzzal’s expertise includes in-depth bathroom fixtures reviews and its solutions.

Leave a Comment