Your shower or bathroom’s leaky faucet is both annoying and costly.
Beyond the irritating drips that the broken faucet generates, you’ll end up paying extra money on your water bill because you’ll waste hundreds or even thousands of gallons over time.
You will need to replace your faucet’s valve to fix the leak and get it back in function. You may find yourself paying more for water because of a dripping shower faucet.
Fixing your faucet will require an O-ring repair kit for your specific type of faucet that contains O-rings, seats, and springs along with a replacement ball for the spout and a utility knife.
Keep reading the article to know about how to fix a leaky Symmons shower faucet.
Steps For Fixing a Leaky Symmons Shower Faucet
It is possible that the shower faucet is leaking, even if the showerhead has been fixed. You need to follow the steps to do it yourself.
Cut Off Water
You’ll need to shut off the water to the shower at the main, just like you did with the showerhead.
Open the faucet and let the water flow out. When you remove the faucet, make sure to keep a towel nearby to catch any water that may spill out of the pipes.
Take Out The Faucet
There are two ways to disassemble a single-knob faucet and two-knob faucets. A two-knob system necessitates the replacement of all valves.
Remove the shower faucet knobs or handles by unscrewing the valves with a screwdriver and a crescent wrench. It is time to take down the guard and put it away. Nuts should be visible.
Take out the larger of the two screws; just one of them is necessary to get at the shower stem. You can remove the showerhead by unscrewing it clockwise.
Replace Washer
Multiple washers are used in the shower stem. When the faucet is disassembled, it’s a good idea to replace all of them, regardless of their condition.
Take a close look for a rubber washer on its tail. Washer for seats is a term used to describe this item. The packing washers are located in the middle of the stem.
Put The Faucet Together
With an old toothbrush and a cup of vinegar and water, you can clean the pipes. Using a pipe cleaner, remove any mineral deposits that may be visible.
Re-attach the shower hose to the hose nut. Valves should be screwed in and knobs reattached after installation. Afterward, apply caulk to all areas where the faucet faceplate or escutcheons encounter shower walls.
Tips For Fixing a Leaky Symmons Shower Faucet?
- You should tape down the floor of your bathtub or shower to keep small pieces from falling down the drain while you’re working on shower faucets, or else you’ll risk damaging your tub or shower. Turn off the water supply before you open a shower valve. This valve can be found in bathrooms, near a bathtub or shower, and even in basements of some houses. Shut off the entire water supply if you can’t find the shower shut-off valves.
- To avoid dripping water from a closed showerhead, do not overtighten the shower faucet. Damage to the valve could lead to subsequent issues because of this activity.
- When utilizing the techniques to fix a leaky showerhead, cover the tub or shower floor with cloths. Remember to cover the drain to keep small pieces from falling into it.
- When repairing a leaking valve, turn off the water supply to the bathroom first. If you can’t find the shower controls, turn off the entire building’s water supply. To remove any remaining water, open the bathroom sink’s faucet and flush out the pipes.
- To minimize the amount of time, it takes to complete your repair, you should do it as quickly as possible. Keep your tools and instructions close by so you can quickly fix any broken fittings.
- To fix a certain type of shower tap or valve you will need to know the type. It’s difficult to buy tools, but the cartridge puller is the one that you need to be sure will work with your faucet model before you buy one. If you’re unsure of which brand to buy, bring your old cartridge to the hardware or home improvement store with you so that a staff member can help you choose the right one.
What Causes The Shower Faucet to Leaky?
A leaky showerhead suggests a problem with the shower faucet or valve. In most cases, this is due to worn inner seals, clogged or corroded parts caused by hard water deposits.
It’s also possible that the rubber gaskets and O-rings, which seal the connections between moving parts, have worn down over time. When this happens, water will trickle from your showerhead.
Final Words
Numerous issues can arise from leaky faucets and showerheads. These include everything from exorbitant utility costs to damage to the bathroom walls. With our systematic guide, you can avoid these problems by learning how to replace your faucet.
These problems can be solved with simplicity if you follow the guidelines about how to fix a leaky Symmons shower faucet in this article.
More To Read:
