While walk-in showers are beautiful and popular in bathroom design, they aren’t for everyone. Because of the distinctive design of barrier-free showers, many people are concerned about this issue.
To my displeasure, I’d walk out of the shower and find a damp floor. It’s easy to fall and be hurt on a wet floor.
To ensure my safety, I had to figure out how to keep the water from rushing out of the shower. In these systems, water is contained by their sloped floor/base, which funnels it towards the drain.
Keep reading the following article to know about how to stop water running off the side of a walk-in shower by following these tips.
How to Stop Water Running Off The Side of a Walk-in Shower
For knowing how to keep water in a shower stall, follow one or more of the following strategies.
Install a Linear Shower Drain
The floor drain in a linear shower has a trough-like channel at the bottom and linear-shaped grates at the top.
In addition to enhancing the shower’s visual attractiveness, their variation in design and color allows them to assist water drainage in the shower.
The linear drain is installed in your bathroom, making it easier to enter and exit the shower. Linear drains work best when the shower floor slopes slightly toward the drain, allowing water to flow freely through them.
Install Shower Curtain Splash Guards
Shower accessories like shower splash guards and weighted shower curtains are designed to help you resist water from getting into the shower. The rubber fins are installed at the corners of the shower wall where it meets the floor to prevent water from dripping onto the floor.
You can make them cemented in place or affixed with self-adhesive strips, and they’re designed to keep water in a roll in the shower.
Magnets sewed onto the bottom border of weighted shower curtains help keep them in place, preventing water from seeping out of the bottom of the shower.
A shower door is another typical option to a shower curtain, which can help prevent water from dripping onto your bathroom floor while you’re taking a shower.
Install a Shower Pan with a Threshold
The front of the shower stall can have a collapsible rubber threshold installed. Wheeled mobility devices may easily enter and exit the bathroom with the help of a walker or wheelchair because the rubber barrier collapses down when the wheels roll over it, and then it promptly pops back up to help prevent water from escaping.
Consider Using Suction Cups
Adding suction cups to your shower is a good way to increase the level of protection against leaks. It is possible to attach these to the bottom of your bath liner and then push them into place before you begin showering.
Using the water from your shower will help keep them secure. The liner will be held in place by suction cups, which will keep it from moving and enable water to leak out into the surrounding environment.
Use a Heavily Weighted Shower Curtain
Using a long, thick shower curtain will help to keep water from dripping out of the door. Additionally, the drapes provide a measure of privacy.
You need to make sure the curtain is long enough but does not touch the floor for the best effects. To avoid mold and mildew growth on the curtain, make sure it’s not too long and dangling on the floor.
Slope The Floor
The slope of the shower floor to the drain is required by the plumbing code.
One of the simplest ways to prevent water from running out is to place the drain in the middle of the floor.
Frequently Asked Questions
Do you need a vapor barrier in the shower?
If you think your shower is completely waterproof, water vapor can still find its way in. You need to use a water barrier for the shower floor. They must be installed beneath and below your shower walls.
Polyethylene or a membrane that is rolled directly over the drywall can be used to make moisture barriers.
How do you keep kids from splashing water in the bathtub?
If your children enjoy splashing around in the bathtub, you can install a second tension-mounted shower rod and hang a clear shower curtain on it.
For my daughter’s ever-growing collection of bath toys, I purchased one of these to serve as an additional storage solution.
Is a zero-entry shower more expensive?
A zero-entry shower water stopper can cost an additional $500 to $800 more. However, people who do get the curbless shower installed, think the slight cost difference is worth it in the long run.
Bottom Line
There is no need to be concerned about how to stop water from coming out of the shower because there are simple and inexpensive ways to accomplish it, as evidenced by the suggestions made above.
You can use heavy shower curtains, splash guards and clips, collapsible water dam, linear shower drain, or slope the floor to funnel more water into the drain.
